![background image](http://html1.mh-extra.com/html/karcher/hds-2-5-20-p-cage/hds-2-5-20-p-cage_operators-manual_4207957009.webp)
9.800-079.0 • Rev. 04/10
9
PRESSURE
W
ASHER
OPERA
T
OR’S MAN
U
AL
Safety
Latch
OPERATING INSTRUCTIONS
STEP 7:
Turn the engine to "Run" position.
STEP 8:
Pull the starter grip. If the engine fails to start
after 2 pulls, squeeze the trigger gun to release pres sure
and repeat step. Return start er gently. After the en gine
warms up enough to run smoothly, move choke to run
position and throt tle to fast position.
CAUTION: Small engines may kick back. Do not hold
pull starter grip tightly in hand.
WARNING! Never replace noz-
zles without engaging the safe ty
latch on the spray gun trig ger.
The four color-coded quick con nect
noz zles provide a wide array of
spray widths from 0° to 40° and are
easily accessible when placed in
the con ve nient rubber nozzle holder,
which is provided on the front of the
ma chine.
NOTE:
For a more gentle rinse,
se lect the white 40° or green 25°
noz zle. To scour the surface, select
the yellow 15° or red 0° nozzle. To
apply de ter gent select the black
noz zle.
NOZZLES
Throttle
Temperature
Gauge
Burner
Swutch
STEP 9:
If hot water is required.
Adjust temperature gauge to prop er
temperature (200°). Turn on Burn er
switch to begin heat ing water.
Selection of high or low pressure is accompanied by
turn ing the han dle.
NOTE:
High pressure nozzle must
be in sert ed at end of wand to obtain high pressure. To
apply soap read operator's manual.
Variable Pressure
Control Handle
Trigger
Variable Pressure
Wand (VP)
High
Pressure
Nozzle
Brass Soap
Nozzle