Kärcher HD 7/17-4 Cage, User Manual

Page: 15 / 52

– 4
 Close the hand spray gun.
 Unscrew the nozzle screw connection
and attach the desired nozzle on the
spray lance.
Note
2 nozzles are included with the appliances
1.524-212.0 and 1.524-213.0:
–
25° spray angle: for heavy contamina-
tions.
–
40° spray angle: for large areas of dirt.
1 nozzle is included with the appliances
1.524-214.0 and 1.524-215.0:
–
25° spray angle: for heavy contamina-
tions.

Danger
With short spray lances, there is a risk of in-
jury, as a hand can accidentally come in
contact with the high pressure jet. If the
spray lance is shorter than 75 cm, you must
not use a point spray nozzle or a rotor noz-
zle.
 Set the appliance switch to "I".
The high-pressure pump starts and
works in circuit operation.
 Unlock the hand-spray gun and pull the
lever of the gun.
* only with detergent valve mounting kit.
몇
Warning
Unsuitable detergents can cause damage
to the appliance and to the object to be
cleaned. Use only those detergents that
have been approved by Kärcher. Observe
the dosage and other instructions provided
with these detergents. For considerate
treatment of the environment use detergent
economically.
Kärcher detergents ensure smooth function-
ing. Please consult us or ask for our cata-
logue or our detergent information sheets.
 Suspend end of suction hose in a con-
tainer filled with detergent.
 Unscrew the nozzle screw connection
and attach the low-pressure nozzle
from the mounting kit on the spray
lance.
 Set the detergent dosing valve on the
detergent suctions filter to the desired
concentration.
 Spray the detergent sparingly on the
dry surface and allow it to react, but not
to dry.
 Spray off loosened dirt with the high-
pressure ray.
 After operations, dip the filter in clear
water. Turn the dosing valve to the
highest detergent concentration. Start
the appliance and rinse for one minute.
Note
With longer interruptions in operation and
the appliance turned on, water will escape
from the thermal valve to the outside. If
needed, place a container under the output
of the thermal valve to prevent water dam-
age.
 Release the lever of the hand spray
gun; the device will switch to circuit op-
eration.
 Pull the lever of the hand-spray gun
again; the circuit operation will be termi-
nated.
Note
Switch the appliance off if the operation is
interrupted for longer time periods.
 Set the appliance switch to "0".
 Disconnect the mains plug from the
socket.
 Shut off water supply.
 Activate hand spray gun until device is
pressure-less.
 Press the safety lever of the hand-spray
gun to secure the lever of the pistol
against being released accidentally.
Select spray type
High pressure operation
Operation with detergent*
Recommended cleaning method
Interrupting operation
Turn off the appliance
15 EN