background image

– 6

ATTENTION

Frost will destroy the not completely water 
drained device.

Store the appliance in a frost free area.

Drain water. 

Pump in conventional frost protection 
agents through the appliance. 

Note:

Use normal glycol-based anti-freezing 
agents for automobiles. 
Observe handling instructions of the anti-
freeze agent manufacturer.

Operate device for max. 1 minute until 
the pump and conduits are empty.

CAUTION

Risk of personal injury or damage! Mind the 
weight of the appliance during transport.

ATTENTION

Protect the trigger from damage during 
transport.

Pull the device behind you at the handle 
for transporting it over longer distances.

Push the handle downward to carry the 
appliance. To carry, hold the appliance 
at the handles and not at the pushing 
handle.

Prior to transporting the appliance in 
horizontal position, remove the deter-
gent bottles from the bottle holder and 
close them.

When transporting in vehicles, secure 
the appliance according to the guide-
lines from slipping and tipping over.

CAUTION

Risk of personal injury or damage! Consider 
the weight of the appliance when storing it.

This appliance must only be stored in inte-
rior rooms.

DANGER

Risk of injury by inadvertent startup of ap-
pliance and electrical shock.
Prior to all work on the appliance, switch off 
the appliance and pull the power plug.

Note:

Used oil must only be disposed of by the 
designated collection points. Please turn in 
used oil there. Polluting the environment 
with used oil is prosecutable.

You can sign with your dealer a contract for 
regular safety inspection or even sign a 
maintenance contract. Please take advice 
on this matter.

Check connection cable for damages 
(risk of electrical shock); get the dam-
aged connection cable replaced imme-
diately by an authorised customer ser-
vice person/ electrician.

Check the high pressure hose for dam-
ages (risk of bursting). 
Please arrange for the immediate ex-
change of a damaged high-pressure 
hose.

Check appliance (pump) for leaks.
3 drops per minute are permitted and 
can come out from the lower side of the 
appliance. Call Customer Service if 
there is heavy leakage. 

Check oil level Please contact Custom-
er Service immediately if the oil is milky 
(water in oil). 

Clean the sieve in the water connection.

Clean filter at the detergent suck hose.

Clean the fine filter. 

Unpressurize the appliance. 

Unscrew the fastening screws of the 
device hood; remove the device hood.

Frost protection

If you cannot store it in a frost-free 
place:

Transport

Storage

Care and maintenance

Safety inspection/ maintenance 

contract

Before each use

Weekly

HD 9/20-4 only:

8

EN

Summary of Contents for HD 7/11-4 M













Reviews: