– 3
Electrical and electronic devices often con-
tain components which could potentially
pose a danger to human health and the en-
vironment if handled or disposed of incor-
rectly. However, these components are
necessary for the proper operation of the
device. Devices marked with this symbol
must not be disposed of with regular house-
hold rubbish.
Notes about the ingredients (REACH)
You will find current information about the
ingredients at:
www.kaercher.com/REACH
– Check the contents of the pack before
unpacking.
– In case of transport damage inform ven-
dor immediately.
Î
Read the oil level display when the de-
vice is not running. The oil level must be
above the two pointers.
Î
Unscrew the fastening screws of the
device hood; remove the device hood.
Î
Cut off tip of oil container cover
Î
Fasten the device hood.
Note:
The EASY!Lock system joins com-
ponents with a quick-fasten thread solidly
and securely with just one turn.
Î
Mount the nozzle on the spray lance
(marking on the adjustment ring at the
top) and hand-tighten it (EASY!Lock).
Î
Join the spray lance with the trigger gun
and tighten until hand-tight
(EASY!Lock).
Note:
Only with HD 7/10 CXF:
For work in confined spaces, the included
adapter with nozzle can be attached direct-
ly to the trigger gun.
"
WARNING
Risk of injury while using a detail nozzle
with the adapter. Only use the adapter with
a flat jet nozzle.
Î
Loosen the clamps of the pushing handle.
Î
Adjust the handle to the desired height.
Î
Tighten the clamps of the pushing handle.
Î
Join the high-pressure hose with trigger
gun and high-pressure connection of
the appliance and tighten until hand-
tight (EASY!Lock).
Î
Insert the crank in the hose drum shaft
and lock it in.
Î
Before rolling up, stretch out the high
pressure hose.
Î
Wind the high pressure hose in uniform
layers on the hose drum by rotating the
crank. Select the rotation direction in
such a way that the high pressure hose
does not get bent.
Î
Join the high pressure hose with trigger
gun and tighten until hand-tight
(EASY!Lock).
Old appliances contain valuable
materials that can be recycled;
these should be sent for recy-
cling. Batteries, oil, and similar
substances must not enter the
environment. Please dispose of
your old appliances using appro-
priate collection systems.
Before Startup
Unpacking
Check oil level
Activate deaeration of oil container
Attaching the Accessories
In devices without hose drum:
In devices with hose drum:
2.
1.
20
EN
