10
English
and then switch it off. Repeat the
procedure several times.
4. Switch off the device.
5. Screw on the nozzle again.
GFCI INSTRUCTIONS
1. Plug the Ground Fault Circuit Inter-
rupter (GFCI) into a working outlet.
2. Press “TEST”, then press “RESET”
to assure proper connection.
Note: The actual appearance of the
GFCI may be different from this illus-
tration.
Operation
DANGER
Risk of injury from the high-pres-
sure water jet
Never fasten the trigger and safety le-
ver in the actuated position.
Do not use the high-pressure gun
when the safety lever is damaged.
Push the safety latch of the high-pres-
sure gun forwards every time before
starting work with the device.
Opening/closing the high-
pressure gun
1. To open high-pressure gun: Press
safety lever and trigger.
2. To close high-pressure gun: Re-
lease safety lever and trigger.
High-pressure operation
The device can be operated in a stand-
ing or lying position.
Note
The device is equipped with a pressure
switch. The motor only starts up when
the high-pressure gun is open.
1. Set the power switch to the "I" posi-
tion.
2. Unlock the high-pressure gun by
pushing the safety lever of the high-
pressure gun backwards.
3. Open the high-pressure gun.
4. For a device with pressure and vol-
ume regulator: Adjust the working
pressure by turning the pressure
and volume regulator.
Operation with detergent
Note
A cup foam lance (option) is required
for operation with detergent.
몇
WARNING
Health risk due to incorrect han-
dling of detergents
Observe the safety instructions on the
detergent.
ATTENTION
Unsuitable detergents may damage
the device and the object to be
cleaned.
Use only detergents approved by
KÄRCHER.
Observe the dosing recommendations
and notes provided with the detergent.
Use detergents sparingly to help con-
serve the environment.
KÄRCHER detergents ensure fault-
free operation. Ask us for a consulta-
tion, request our catalog or our deter-
gent information sheets.
Illustration C
1
Foam nozzle
2
Container
3
Aperture kit
