Pump Inspection
You should routinely make a visual
inspection of the pressure washer’s pump.
If you notice oil leaking around the pump
seals, you should take the pressure
washer to a Kärcher Authorized Service
Center for repair. (You can locate a
service center in your area online at:
www.karcher.com.au .or
www.karcher.co.nz.
Carry out maintenance tasks for the
engine according to the specifications
provided in the operating instructions
provided by engine manufacturer.
With or Without Detergent
Pre-rinse deck and surrounding area with
fresh water. If using Kärcher universalcleaner,
apply to surface at low pressure. For best
results, limit your work area to smaller
sections of approximately 8 square meters.
Allow Deck Wash to remain on surface 1-3
minutes. Do not allow detergent to dry on
surface.
Rinse at high pressure in a long
sweeping motion keeping the spray
nozzle approximately 8-15cm (3-6
inches) from the cleaning surface.
Always clean from top to bottom and
from left to right. When moving on to a
new section of the cleaning surface,
be sure to overlap the previous section
to eliminate stop marks and ensure a
more even cleaning result.
With or Without Detergent
Pre-rinse vehicle with fresh water. If
using Kärcher car shampoo Vehicle
Wash, apply to surface at low
pressure. For best results, clean one
side of vehicle at a time and always
apply detergent from bottom to top, do
not allow detergent to dry on surface.
If needed, use special wash brush
attachment (not included) to remove
stubborn dirt. Rinse at high pressure
in a sweeping motion keeping the
spray nozzle approximately 8-15cm
(6-8 inches) from the cleaning surface
(distance should increase when
rinsing pin-striping or other sensitive
surfaces). Always clean from top to
bottom and from left to right. For best
results, wipe surface dry with a
chamois or soft dry cloth.
Page 19
Engine
Deck Cleaning
Pump
Cars, Boats
& Motorcycles
Maintenance Instructions
Cleaning Tips
Summary of Contents for G 3800
Page 1: ...G 3800 G3800 Petrol Pressure Washer 9 507 268 0...
Page 2: ...Page 2 Machine Part List...
Page 25: ......
Page 28: ......