Kärcher G 3800, Manual

Page: 11 / 28

Crankshaft Pump shipped with pump
oil in crankcase.
Before starting engine, Always check
pump oil before each use.
1. Crankshaft Pump shipped with
pump oil inside the crankcase. In
order to avoid pump oil leakage
during shipment, Use a oil plug install
on the oil fill hole to plug up pump oil
inside the crankcase.
2.
Pump Breather plug
can improve
pump performance, reduce pump oil
temperature and extend pump life.
For first use, Replace the pump oil
plug with the
pump breather plug
.
Reposition the pump breather and
tighten the pump breather onto the oil
fill hole.
3. Pump with a oil level display mirror.
If pump oil is lower than pump oil
level , pls refill enough SAE15W-40 oil
upto pump oil level.
4. If pump oil is dirty, pls unscrew the
pump oil drain plug , drain dirty
pump oil out off the pump, then
tighten pump oil drain plug onto pump
again. And refill enough SAE15W-40
oil into the pump upto pump oil level
.
5.
Pump oil should be changed after
the first 20 hours, then changed at
least each 50 hours. Failure to
change pump oil will void warranty.
● Before starting engine, Always check
pump oil before each use.
● Crankshaft pump Always use SAE
15W-40 oil. Pump Oil: Need 220ml.
Pump Oil Level
Page 11