25
Maintenance
Replacement Procedure
1.
Disconnect power to the machine.
2.
Remove four 5/16" screws to remove the skimmer
motor cover.
3.
Remove the two wire nuts from the power leads to
disconnect the leads from the motor, and discon-
nect the conduit from the motor housing.
4.
Remove the four 5/16" nuts from the skimmer
assembly mounting plate to remove the skimmer
assembly from the machine.
5.
Remove the two screws from the center of the
skimmer disk to detach the disk from the skimmer
assembly. To remove the disk, disengage it from
the center pin, then slide it down.
6.
Remove the three screws from the skimmer motor
mounting plate to remove the motor from the
skimmer assembly.
7.
Reassemble the skimmer assembly and replace it
on the machine. Assembly is the reverse of
removal.
CUDA 7248 Operator’s Manual 9.801-712.0 - AA
Screws (Two on
Each Side)
Slide Cover
Toward Rear
to Remove
Wire Nuts
Oil
Skimmer
Motor
Nut
Screws
Screws
