Kärcher BD 80/100 W Classic Bp, Manual

Page: 7 / 16

English 7
17
Hose switch
18
Fresh water tank filling hole
19
Suction bar
20
Suction bar height adjustment
21
Suction bar inclination adjustment
22
Wing nuts for fastening the suction bar
23
Suction hose
24
Fresh water filling level display
Fresh water drain hose
25
Cleaning head lever
26
Water volume regulation knob
27
Suction bar lever
28
Battery plug connector
29
Key-operated switch
30
Display
31
Working speed rotary knob
32
Travel direction switch
33
Waste water tank drain hose with dosing unit
34
Transport holder for suction bars
** Not in scope of delivery
Color coding

Control elements for the cleaning process are yellow.

Control elements for maintenance and servicing are
light gray.
Symbols on the device
* optional
Installation
Unloading
1. Remove the carton.
2. Remove the straps.
3. Remove the wooden blocks fastened to the pallet by
screws.
4. Put a ramp in front of the pallet using the 3 upper rein-
forcement boards from the carton packaging and the
safety board screwed across the pallet and fasten with
particle board screws.
1
Safety board
2
Squared timber
3
Reinforcement board
5. Push the squared timber unscrewed from the pallet un-
der the ramp for support and screw tight.
6. Press the cleaning head lever downwards and engage
it towards the right.
7. For BD 80/100 only: Press the brake lever down.
1
Brake lever
Note
There is no brake for BD 70/75. Releasing the brake is not
necessary with this device.
8. Pull the device backwards off the pallet.
9.
For BD 80/100 only: Press the brake lever up.
Installing the suction bar
1. Insert the suction bar in the suction bar mount.
2. Tighten the wing nuts.
3. Fit the suction hose.
Fresh water tank drain opening
Waste water tank drain opening
Increased cleaning head contact pressure
Battery access
Fresh water tank filling level (50%)
Insert the charger plug here
Eyelet point
* Mop holder
ATTENTION
Incorrect socket
Risk of damage
DO NOT insert the charger plug here
Normal cleaning head contact pressure
Raise the cleaning head
Pedal for raising/lowering the cleaning head
Brush replacement pedal
1