BR/BD 55/60 WP
Basic settings and servicing
Page 17 / 25
Service Information International 02.2003
Setup-Menu
Message on the display
Explanations
I_MB_MAX= 68A
Shows the adjusted overload protection for the
brush motors.
Possible settings: from 40 - 80 A.
Factory setting: 68 A.
Brush_Delay= 4s
Shows the switch-off delay for the brushes
after the machine stops.
Possible settings: 2 - 5 sec.
Factory setting: 4 sec.
SETUP exit?
If this is confirmed by pressing "Settings", then
the changed settings are stored.
The settings are not stored if the machine is
switched OFF with the key switch beforehand.