BR/BD 55/60 WP
Basic settings and servicing
Page 21 / 25
Service Information International 02.2003
1
Brush head (BR version)
2
Fastening screws, brush motor
3
Cover plate
4
Wing nuts, cover plate
5
Cover, drive belt
6
Fastening screws, cover drive belt
7
Drive belt
Replace drive belt (BR version)
The brush rollers are each driven by a drive belt
(7).
– Unscrew the wing nuts (4).
– Remove the cover plate (3).
– Unscrew the fastening screws (6) for the belt
cover (5) and remove the belt cover (5).
– Loosen 4 fastening screws (2) for the motor.
– Remove the drive belt (7).
– Install a new drive belt and stretch tight.
– Re tightening the motor fastening screws (2).
Replace drive belt
Drive belt and motor fastening
Microswitch, brush motors
9
Microswitch S7
10
Retaining plate, microswitch
Basic settings and servicing
Microswitch (S7) for the brush head
The microswitch (9) is located at the rear on the
right next to the batteries.
The microswitch (9) is activated when the brush
head is lowered by the pedal, and switches the
brush motor on or off.
The microswitch (9) can be adjusted at the re-
taining plate (10).
1
3
4
5
4
6
7
2
9
10