![background image](http://html1.mh-extra.com/html/karcher/b-80-w-bp/b-80-w-bp_service-manual_3579740023.webp)
English 5.906-468.0 Rev. 00 (02/09)
23
Î
Fold the safety locks on the brush head pickups on the left and
right of the brush head up and pull them out of the sides of the
pickups.
Î
Fold the safety lock on the brush head pickup on top of the
brush head down and pull them out of the sides of the pickups.
Î
The brush head is disconnected from the appliance and can be
removed.
Î
Install the new brush head in reverse sequence.
Î
To set the brush head, loosen the nuts on the adjusting screw
and align the brush head so that:
both brush heads touch the floor evenly on the BR head.
the brush head on the BD head is aligned parallel to the floor.
Î
Retighten the nuts.
1
Connection plug
2
Adjusting screw
3
Nuts
4
Connection coupling, water supply
5
Safety lock, left
6
Safety lock, right
7
Safety lock, top
Î
Raise the brush head.
Î
Press the pedal for changing the brushes downward beyond its
resistance.
Î
Pull the disc brush out of the side below the cleaning head.
Î
Hold the new disc brush under the brush head, push upward
and lock.
1
Pedal for brush exchange (left and right on the brush head)
Î
Release the screw for locking the tank and swing up the tank.
Î
Unscrew the star handle screw of the connection plug cover
(see Chapter 4.20) on the brush head and pull the cover out.
Î
Disconnect the connection plug.
Î
Disconnect the connecting coupling of the water supply.
Î
Fold the safety locks on the brush head pickups on the left and
right of the brush head up and pull them out of the sides of the
pickups.
Î
Fold the safety lock on the brush head pickup on top of the
brush head down and pull them out of the sides of the pickups.
Î
The brush head is disconnected from the appliance and can be
removed.
Î
Install the new brush head in reverse sequence.
1
Safety lock, left
2
Safety lock, top
3
Safety lock, right
5.8
Replace the disc brushes on the BD brush head
5.9
Remove the BR brush head