10
English 5.906-468.0 Rev. 00 (02/09)
The user can use the setup menu to modify the basic settings of
the appliance.
Î
Turn off the appliance using the key switch.
Î
Switch on the key switch.
Î
The display shows "B80W". Quickly tap the info button 3 x with-
in one second. The display shows "setup menu".
Î
Browse through the setup menu using the rotating function of
the info button.
Î
A menu point is modified by tapping the info button. The display
will blink. The setting is changed by rotating the info button and
it is saved by tapping the info button. Once the new setting is
saved, the display will no longer blink.
Î
Keep browsing via the rotating function until you reach the
menu item "SETUP EXIT“. The setup menu is saved and exited
by retapping the info button.
4.4.2
Open the setup menu
Menu
Settings
Explanation
Factory settings
the lan-
guage
German
English
Displays the text in German.
Displays the text in English.
German english
Reverse
clean
On
Off
Driving possible with lowered vacuum bar. Suction turbine on during reverse
drive.
Driving impossible with lowered vacuum bar. Suction turbine OFF during re-
verse drive.
On
Brush
delay
0.5 to 5 seconds
60 seconds
Switch-off delay to brush stop when machine is standing still.
60 second setting cannot be saved. Only for service work.
2 seconds
Low
Battery
20.0 V - 22.8 V
Deep discharge protection for low-maintenance and maintenance-free bat-
teries
22.0 V for mainte-
nance-free batter-
ies.
I MB
MAX
40 A - 80 A
Overload protection of the brush motors.
68 A
FACT
On
Off
Power, Whisper and Fine Clean can be selected from the operator menu.
Power, Whisper and Fine Clean are not displayed in the operator menu.
On with BR
OFF with BD
Clean
Speed edit
On
Off
The cleaning speed can be changed in the operator menu.
The cleaning speed is not shown in the operator menu and can only be mod-
ified in the setup menu.
On
Clean
Speed Fwd
30 - 100 %
Displays the cleaning speed during forward drive in % of the max. transport
speed (6 km/h).
"CleanSpeed Fwd" is only displayed if "Clean Speed Edit" – "Off" was select-
ed in the menu.
70%
Clean
Speed Rev
30 - 100 %
Displays the cleaning speed during reverse drive in % of the max. transport
speed (4.5 km/h).
"CleanSpeed Rev" is only displayed if "Clean Speed Edit" – "Off" was select-
ed in the menu.
70 %
Water-Edit
On
Off
The water volume can be changed in the operator menu.
The water volume is not shown in the operator menu and can only be modi-
fied in the setup menu.
On
Water
0 - 10
Water volume (electrical ball tap). Display appears if "Water Edit ON" is set
in the setup menu.
5
Water-Time
0.5 s - 4.0 s
After the water is turned on, the ball tap is fully opened for this time period,
so that the empty hose can be filled as quickly as possible.
2.0 s
RM-
Function
On
Off
Detergent dosing exists.
Detergent dosing does not exist.
On
RM-Edit
On
Off
The detergent dose can be changed in the operator menu.
The detergent dose is not shown in the operator menu and can only be set
in the setup menu.
On
RM-
Dosing
0 - 3 %
Detergent dosing. Display appears if "RM Edit ON" is set in the setup menu. 1,0 %
Flashlight
On
Off
Beacon light (option) switched on during driving.
Beacon light (option) switched off.
Off
Brake
Ramp
1 to
4
Appliance is immediately braked.
Appliance is gently braked.
1
Debug
Mode
On
Off
Access to debug mode during SETUP exit.
No access to debug mode during SETUP exit.
Off
Load
Defaults
Tap menu item once. Basic settings are saved again.
Setup Exit
The setup menu is saved and exited by tapping the info button.
