English
11
prox. 5 seconds to suck in the remaining
dirt from the suction hose.
Î
Turn off the appliance and disconnect
the mains plug.
Empty the container
Illustration
Î
Press the unlocking mechanism by foot
and remove the vacuuming device from
the chassis.
Illustration
Î
Remove the motor casing and empty the
container.
Î
Insert the vacuuming device in the chas-
sis - the container is self-locking.
Storing the Appliance
Î
Place the accessories in the appropriate
compartments at the appliance and store
the appliance in a dry room.
Î
The large wheels facilitate transportation
on stairs; hold the device at the transport
handle while doing so.
Note
: Never transport the device at the
handle of the vacuuming device; risk of
tilting!
Î
The device is to be fastened properly be-
fore transporting the device in the car.
Note
: We recommend that you first re-
move the vacuuming device from the
chassis.
Risk of injury
Always switch off the appliance and pull out
the mains plug before care and maintenance
work.
몇
Caution
Do not use abrasives, glass or universal
cleaners! Never immerse the appliance in
water.
Î
Clean the appliance and accessory parts
made of plastic with a commercial plastic
cleaner.
Î
If required, rinse the container and ac-
cessories with water properly and dry
them before reuse.
If the cleaning power of the appliance dete-
riorates please check the following:
Î
Accessories, suction hose or suction
tubes are clogged, please remove the
obstruction using a stick.
Î
Filter bag is full, insert a new filter bag
(
for the order no. please see the spare
parts list at the end of the present in-
structions
).
Î
The cartridge filter is dirty, clean the filter
under running water, allow the filter to
dry completely before inserting it again.
Replace the filter if damaged (
for the or-
der no. please see the spare parts list at
the end of the present instructions
).
Finish operation
Transporting the device
Maintenance and Care
Cleaning the device
Faults
Decreasing cleaning power
