Kärcher 1.573-521.0, Manual

Page: 16 / 196

– 6
 Check the filter seat and correct if necessary.
 Switch off the appliance, clean the filter or insert a
new filter.
Note: Appliance is not running.
Illustration
 Exchange the poles at the appliance plug.
 Perform the filter cleaning.
 Change the filter.
 If the disposal bag is full and the minimum volume
flow is fallen short of it has to be replaced.
The warranty terms published by the relevant sales
company are applicable in each country. We will repair
potential failures of your appliance within the warranty
period free of charge, provided that such failure is
caused by faulty material or defects in manufacturing. In
the event of a warranty claim please contact your dealer
or the nearest authorized Customer Service center.
Please submit the proof of purchase.
 DANGER
Only use accessories that are approved by
the manufacturer and marked with the Ex-la-
bel for type 22. The use of other accessories
may pose a risk of explosion.
Only use original accessories and spare parts, they en-
sure the safe and trouble-free operation of the device.
For information about accessories and spare parts,
please visit www.kaercher.com.
–
Accessories are not included in the delivery. The
accessories for the device must be ordered sepa-
rately, depending on the application.
– The device's correct function is only guaranteed
when using the suction hose nominal width of
DN40.
– You can procure the spare parts and the attach-
ments from your dealer or your KÄRCHER branch
office.
We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements of the EU Directives, both in its basic design
and construction as well as in the version put into circu-
lation by us. This declaration shall cease to be valid if
the machine is modified without our prior approval.
The undersigned act on behalf and under the power of
attorney of the company management.
Managing Partner
M. Pfister
Kärcher Industrial Vacuuming GmbH
Robert-Bosch-Straße 4-8
73550 Waldstetten (Germany)
Phone: +49 7171 94888-0
Fax: +49 7171 94888-528
Waldstetten, 2021/11/04
We hereby declare that the product described below
complies with the relevant provisions of the following
UK Regulations, both in its basic design and construc-
tion as well as in the version put into circulation by us.
This declaration shall cease to be valid if the product is
modified without our prior approval.
Dust comes out while vacuuming
Pilot lamp "phase and rotary field fault" lights
up red
Indicator lamp "negative pressure" lights up
red
Warranty
Accessories and Spare Parts
EU Declaration of Conformity
Product: Wet and dry vacuum cleaner
Type: 1.573-xxx
Relevant EU Directives
2006/42/EC (+2009/127/EC)
2011/65/EU
2014/30/EU
2014/34/EU
Applied harmonized standards
EN 55014–1: 2017 + A11: 2020
EN 55014–2: 2015
EN 60079-0: 2018
EN 60079-31: 2014
EN 60335–1
EN 60335–2–69
EN IEC 61000–3–2: 2019
EN 61000–3–3: 2013 + A1: 2019
EN 62233: 2008
EN IEC 63000: 2018
Marking
II 3D Ex tc IIIC T125 °C Dc
Declaration of Conformity (UK)
Product: Wet and dry vacuum cleaner
Type: 1.573-xxx
Relevant UK Regulations
S.I. 2008/1597 (as amended)
S.I. 2012/3032 (as amended)
S.I. 2016/1091 (as amended)
S.I. 2016/1107 (as amended)
Applied designated standards
EN 55014–1: 2017 + A11: 2020
EN 55014–2: 2015
EN 60079-0: 2018
EN 60079-31: 2014
EN 60335–1
EN 60335–2–69
EN IEC 61000–3–2: 2019
EN 61000–3–3: 2013 + A1: 2019
EN 62233: 2008
EN IEC 63000: 2018
Marking
II 3D Ex tc IIIC T125 °C Dc
16 EN