8-zone Telephone Alarm System
-
6
-
Instruction:
After entering 03#, main unit will make a short “Di” sound,
and then you can enter 8 bit numbers ranges from 0 to 6, and press “#” to
confirm, then it will make four short “Di” sound, which means the setting is
successful.
Application:
1.When connecting with monitor center, if the type of some zone has been
set, monitor center can see the alarm type when alarm occurs in this zone
(such as anti-theft, fire alarm, gas alarm and so on).
2.When there is some malfunction occurs in some zone, set to be bypass
zone is recommended because the main unit will not receive any
information from this zone. And then you can set it to be other types after
precluding malfunctions.
Suggestion: Set the unused zones to be “Bypass Zone”
<4> How To Modify User' code 000000 by default
09#BBBBBB#BBBBBB#
“BBBBBB” is 6 bits new code, and it should be any number ranges from 0 to 9.
Instruction:
After entering 09#, you will hear a short “Di” sound, then
you can enter 6 bits new code and press a “#” to confirm, after hearing a short
“Di” sound, enter 6 bits new code and a “#” again, it will make four short “Di”
sound, which means the setting is successful.
After modifying the code, the old code is invalid automatically, and you
should enter setting state by entering new code next time.
Note:
you should keep the code in mind, if you forget it, please recover
user's code according to 6.1 chapters.
<5> How To Set Alarm Volume Loudest volume by default
Instruction:
After entering directive, main unit will make alarm sound
with the volume as you set, then press A“#” to confirm, and it will make four
short “Di” sound, which means the setting is successful.
<6> How To Set Inner Siren Duration 30 Minutes by default
25#DD#
Instruction:
“DD” is the inner siren duration, which ranges from 00 to
99 minutes, and it should be 2 bits.
Directive Instruction
21# Lowest
22# Middle
23# Louder
24# Loudest
