8-zone Telephone Alarm System
-
13
-
learned in this zone, and if the indicator light is off, which means no
remote controller has been learned in this zone.
2.This directive only used to display the indicator lights, and it won't
modify any settings.
Example 1:
Two remote controllers has been learned to be the fifth and
seventh remote controller.
In manager's program state, enter 99#, then the indicator light of the 5
and 7 zone will be on, and the indicator lights of other zones will be off. If you
want to exit displaying state, only enter a “#”, then it will make four short “Di”
sound, which means the setting is successful.
7.System Installation
7.1Testing Before Installation
①
Well connect all lines according to the fourth chapter, and then power
on main unit.
②
Power on other accessories (such as wireless door sensor, PIR detector,
wireless external siren and so on).
③
Check to see whether all accessories are correct or not, and test to see
whether all settings ( such as dialing function, at home/away home zone
list) are meet your requirements or not, after checking, power main unit
and all accessories down, then begin to install.
7.2 Install Requirements
①
Firstly, make a scheme of all defense zones according to user's needs
and the surroundings, and keep in file.
②
Fix the install place, angle and height of all fittings/main unit
according to the valid defense area. And they should be installed as
covert as possible.
③
When installing wireless accessories, under user's needs are satisfied,
the distance between them and main unit should be as short as possible
to get the best receive effect.
④
Main unit and all wireless accessories should far away from the
equipments which will emit strong electromagnetic radiations, such as
television, air-conditioner, computer, micro-oven and so on.
⑤
The drawing should clearly marked the model and place of main unit
and all detectors, and keep in filefor afterwards maintenance.
7.3Installation And Debugging Of Main Unit And Accessories
(1)Main Unit
①
The position of microphone and trumpet of main unit should not be
covered to get the best monitor sensitivity and alarm loudness.
②
To assure the normal working of this system, backup battery is
recommended.
③
To get the best receive effect, please pull the antenna out.
(2)Wireless Remote Controller
