8-zone Telephone Alarm System
-
14
-
①
Emit Indicator: If the light is on, which means it is sending
signal, if the light cannot be on, please change the battery.
②
Arm In Away Home Mode: Press this key, main unit will
make a short “Di” sound, then the main unit will be in arm
state of away home mode.
③
Disarm: Press this key, main unit will make four short “Di”
sound, then the main unit will be in disarm state.
④
Arm In At Home Mode: Press this key, main unit will make
a short “Du” Sound, then the main unit will be in arm state
of at home mode.
⑤
Emergency Alarm: Press this key, main unit will make
alarm sound immediately
Picture 5
(3)Wireless Door Sensor
①
The distance between magnet part and sensor part should not beyond
10mm.
②
The magnetic part should be installed in moveable place, such as door
or window, and the sensor part should be installed in the fix place.
③
Pull the antenna out to get the best receive effect.
④
Emit Indicator light (Red): If this light is on, which means it is
sending alarm signal.
⑤
Power Indicator (Red): If this light is on, which means battery power
lower, then you should change the battery in time.
(4) PIR Detector
Please refer to the corresponding part
(5) Smoke Detector, Gas Detector
Please refer to the corresponding part
7.4 Testing After Installation
After installing all main unit and accessories, please power them on to
test, and make sure the installation is valid and credible.
8.
User's Operation
8.1All Indicate Sound Of Main Unit
(1)Leaving Time
Emit Indicator
Power Indicator
Sensor Part
Magnetic Part
Should not beyond10mm
Picture 6
