Standing Seam Roof Sheets Upto 600 Mm Seam Distance
These posts are used for larger seam distance up to 600mm.
14
Step D : Corner Piece; PN 4000(16)A
è
Install the post as described in Step 2.
è
Insert the cable through the Corner Tube.
è
Connect the Corner piece assembly to the post with the fastener.
Step C : Intermediate Bracket; Ref. PN 4000(10)
è
Insert the cable through the intermediate.
è
Connect the intermediate to the receiving structure with the
fastener.
è
The angle of the Intermediate may be changed by inserting the
intermediate fastener to different holes provided.
Step B : Roof Top Anchor Post Intermediate; Ref. SA 07F
è
With grub screws fix the standing seam clips to the seam.
è
Mount the roof post base plates on the seam clips and with
fasteners.
è
Mount the top and the bottom brackets on the base plates using
nuts and bolts.
Step A : Roof Top Anchor Post Extremity; Ref. SA 07E
è
With grub screws fix the standing seam clips to the seam.
è
Mount the roof post base plates on the seam clips and with
fasteners.
è
Mount the top and the bottom brackets on the base plates using
nuts and bolts.
è
Connect the eye on the junction of top and bottom brackets.
POSTS
Ref. PN 4000
Trapezoidal Roof Sheets
These Posts are suitable for a variety of trapezoidal roof sheet designs.
It has multiple holes to suit different peak distances.
15
Step A : Roof Top Anchor Post Extremity; Ref. SA 07G
è
Stick the base plates of the post to the roof with double adhesive
EPDM sheet.
è
Drill 16 holes for the blind rivets, four at each corner, rotate the base
0
plate by 90 if the holes does not match the seam position.
è
Rivet with a riveting gun.
è
Cover the rivets with a weather proofing flash tape.
è
Mount the top and the bottom brackets on the base plates using
nuts and bolts.
è
Connect the eye on the junction of top and bottom brackets.
Step B : Roof Top Anchor Post Intermediate; Ref. SA 07H
è
Stick the bottom plate of the roof with double adhesive EPDM
sheet.
è
Drill 8 holes for the blind rivets.
è
Rivet with a riveting gun.
è
Cover the rivets with a weather proofing flash tape.
è
Mount the top and the bottom brackets on the base plates using
nuts and bolts.
Step C : Intermediate Bracket; Ref. PN 4000(10)
è
Insert the cable through the intermediate
è
Connect the intermediate to the receiving structure with the
fastener.
è
The angle of the Intermediate may be changed by inserting the
intermediate fastener to different holes provided.
Step D : Corner Piece; PN 4000(26)
è
Install the post as described in Step 2.
è
Insert the cable through the Corner Tube.
è
Connect the Corner piece assembly to the post with the fastener.
POSTS
Ref. PN 4000
