17
Rotary Laser
The Prolaser
®
899 Electronic Rota-Line is supplied with on-board
internal rechargeable batteries and battery charger (AC/DC
Converter).
Warning: Non-rechargeable "C" batteries are not to be used!
1. Recharge the batteries when the power indicator on the
control panel flashes.
2. Plug the battery charger into a power source.
3. Insert the plug of the battery
charger into the socket in the laser.
1. Battery Charger
2. Back of Laser
3. Socket Position
4. Rechargeable Batteries
5. Battery cover
Note:
The Rotary Laser can be operated while recharging. It
takes ' approximately seven hours to fully charge the batteries.
4. The indicator lamp on the battery charger illuminates when
charging. The indicator lamp will flash when the batteries are
fully charged.
5. The batteries can be removed from the Rotary Laser by
unscrewing the eight screws holding the battery compartment
cover in place.
POWER SUPPLY
