13
Changing Rotation Speed
The laser beam is more visible when the rotation speed is slower.
Change the speed of the rotating laser head by pressing the
Speed control button. The default option is 600 rpm. Pressing
on the Speed control button moves a step forward in the
speed cycle (600 0 60 120 300 600 rpm)
To transfer a level mark over long distances or in poor
visibility, the rotation can be stopped (speed = 0 rpm). The
laser beam can then be accurately positioned using the Left
and Right adjust buttons.
Scan Function
The Scan function is used to limit the area covered by the
laser beam, for safety reasons or to improve visibility and
sensitivity. A smaller scan segment will be more visible than
a larger one.
The default mode is 360° rotation, which provides a horizontal
or inclined beam throughout the work area or room.
The scan button changes the mode from 360° rotation to
10° 45° 90° 180° 360° rotation. Press the scan button
until the laser is set at the desired scan mode. The scan mark
can then be accurately positioned using the clockwise and
anticlockwise rotation controls.
