C O N T R O L C E N T R E
To review the task schedule that you created using the Control Centre pro-
gram, enter the switch
–ct
in the Control Centre command line. The com-
plete list of created tasks with their descriptions will be displayed
on your
screen. Every task in the list is assigned an ID. The ID’s general format is
IdN
, where
N
is the serial number of a task in the task schedule. These
numbers must be used when removing tasks from the schedule.
To delete
a task,
enter the switch
-cd=IdN
(where
IdN
is the required task ID) in the Con-
trol Centre start up command line. For example:
./kavucc –cd=Id5
14.4. Saving
the
performance
report
Control Centre can save the performance report to the system log or a
separate file. You can define the reporting settings by using the following
switches in the Control Centre start up command line:
-w[t][a][-][+][=filename]
This switch logs the performance report into the defined file (the default
file is
report.txt
).
If the character
a
is defined in the switch, the report will be appended to
the contents of
filename,
the character
t
overwrites the report with a new
one. If the cha is defined, extra information will be included in
the report heading. The character
–
disables the extra information in
the report heading.
-ws[-]
This switch logs the performance report in the system log.
233