I N S P E C T O R
copy and later all newly collected data will be compared against this copy.
When starting Inspector you must also make sure that the location to be
checked does not contain viruses. By using the switch
–dc
in the Inspector
command line you set the program to transfer all the new files to the Dae-
mon program where they will be examined.
s[=database_name]
is a mandatory switch in the Inspector command line.
This switch defines the filename where the location details must be saved.
By comparing newly collected data against the database master copy the
program identifies new and modified files and checks for viruses in them.
You can create separate Inspector databases for every location to
be checked.
If a database master copy for the location to be checked already exists, it is
advisable to load it using the command line switch
–g[=database_name]
.
If you specify the switches
–s[=database_name]
and
–g[=database_name]
in
the command line the program will add newly collected data to the exiting
database master copy for the defined location to be checked.
If you specify the switch
–s[=database_name]
in the command line the pro-
gram will create a new database (if the database defined in the switch does
not exist) or overwrite the existing database with the new one (if the data-
base defined in the switch already exists).
If you specify the switch
–g[=database_name]
in the command line the newly
collected data will not be saved to the corresponding files, i.e. this data will
not be used as the database master copy against which the subsequently
collected data must be compared.
If you do not specify any database name in the command line switch,
the program will use the default database under the
checkbase
name.
It is not advisable to save the collected data to the databases con-
taining performance parameters of the Kaspersky Anti-Virus for
xBSD Mail Server components.
221