K E E P E R
To create an address group, follow these steps:
1. On
the
group
page (see subchapter 11.10.3.1), press the
add
button.
2. Enter the group name in the
Name
text field of the
Add
new group
dialog box on your screen.
3. Press
the
add
button. The group name will be added to the
group list.
4. Press
the
properties
button.
5. Enter the mask (or the list of masks) for the From ad-
dresses to be checked for viruses by the Keeper program
in the
Sender mask
text field of the
Group: group_name
dialog box on your screen.
6. Enter the mask (or the list of masks) of the To addresses to
be checked for viruses by the Keeper program in the
Re-
cipient mask
text field.
The masks must be entered in compliance with the
POSIX regexp
standard.
If you do not define any value for the
Recipient mask
or the
Sender
mask
parameter, the program will use the mask.
*@.*
for it
If you define no value for both the
Recipient mask
and the
Sender mask
parameters
, no messages will be processed according to processing
rules of this group. You may do this to disable processing rules of the
address group without removing it from the group list. In any case you
will be able to enable the group rules by defining the required address
masks for this group.
7.6.2.3. To
check or not to check…
For every message sent by or delivered to users you may enable or disable
the message-processing mode. To do this:
87
