M O N I T O R
size where Monitor will store these file names. It must be done by using the
OpenCacheSize
parameter. Your cache size depends on your computer ca-
pacity. Select the size that will allow your Monitor cache to store names of
all files that are opened for writing in your system at any time, but which will
not result in reduction of your system efficiency. Therefore, the recom-
mended value is located within the range 500 through 5000.
For example:
OpenCacheSize 500
If the
OpenCacheSize
value is
0
, monitoring of the file opened for writ-
ing will be disabled!
You can reduce the check time by increasing the number of files to be
processed simultaneously. However, it may slow down your operating sys-
tem performance, therefore it is advisable to scan not more than 5 to 15
files at once.
To define the maximum quantity of simultaneously scanned
files,
enter the required number in the
MaxConcurrentCheck
line. For example:
MaxConcurrentChecks 10
To enable the program to report errors,
type
OK
in the
Warnings
line of the
Options
section.
To define the program performance reporting mode,
in the
Report file
section of the configuration file define values for the fol-
lowing lines:
•
LogFile
—the full path to the log file. For example:
LogFile /tmp/KasperskyMonitor.log
For the program to log its performance results make sure to define
the full path to the log file, otherwise
Monitor will not create it at all.
104
