Backup copying
71
3. Specify the parameter values that will be used to perform the
search for (filtering of) objects stored in the backup storage. The
following object attributes are used to configure the parameters:
•
object status (multiple values can be selected);
•
object name;
•
message sender;
•
message recipient;
•
message subject;
•
time interval, during which the message was sent
4. After you are done with the filter settings, press the
Apply
or the
OK
button to create the filter. If you wish to cancel creation of the
filter, press the
Cancel
button.
As a result of this action, a subfolder with the filter's name will be created
in the console tree inside the
Backup Storage
folder. When the filter is
selected in the console tree, only data that comply with the filter criterion
will be displayed in the results pane.
Later you can alter then filter parameters value or delete the filter using the
shortcut menu commands or the
Action
menu commands.
In order to change the filter parameters:
1. Select the filter you need to modify in the
Backup Storage
folder in
the console tree and use the
Properties
command in the shortcut
menu or the analogous item under the
Action
menu. This will open
a filter settings configuration window
(see Figure 31).
2. Modify the filter parameter values as required.
3. In order to apply the changes, press the
Apply
or the
OK
button.
For exit without saving the changes made, press the
Cancel
button.
As a result, the information displayed in the results pane will be updated
according to the new values of the filter settings.
