K-3 & K-4 Series Owner’s Manual
Page 5
TECHNICAL SPECIFICATIONS
Electrical Specifications:
Note: The control unit Power Inlet is used as the means of isolating the equipment from the supply mains on all poles
simultaneously.
U.S. / INTL.
Input Voltage AC:
90 ~ 240 VAC
Input Frequency:
60 / 50 Hz
Maximum Power Consumption: 180 W
±
30 W
Circuit Protection:
Dual fused, 250V, 5A Fast blow fuse(s), std. fuses.
Fuse Type:
Bussmann S500-5-R
Breaking Capacity: (BRK.CAP.) @125 VAC is 10kA
@250 VAC is 200A
Mode of Operation:
Continuous
Performance Specifications:
Weight Capacity:
Mattress Overlay:
360 lbs. (163 Kg.) maximum.
Standard Replacement Mattress:
360 lbs. (163 Kg.) maximum.
Bariatric Replacement Mattress:
1000 lbs. (455 Kg.) maximum.
Raised Side Bolstered Mattress:
360 lbs. (163 Kg.) maximum.
Bariatric Raised Side Bolstered Mattress:
1000 lbs. (455 Kg.) maximum.
Foam Aire Mattress:
360 lbs. (163 Kg.) maximum.
Universal Mattress (UM):
360 lbs. (163 Kg.) maximum.
Expandable Mattress (XM):
1000 lbs. (455 Kg.) maximum
Pressure Zones:
5
AP Zones:
2 (K-4 models only)
Max Flow:
1275 LPM (45 CFM)
Support Surface Inflation Time: Within 60 seconds.
Patient Comfort Pressures / Alternating Pressure (K-3, K-4)
Soft Pressure:
6
±
5 mmHg
Firm Pressure:
32
±
5 mmHg
A/P Time:
1 Minute - 99 Minutes. (K-4 model only)
A/P Low Pressure:
10% - 75% (K-4 model only)
Patient Comfort Pressures / Alternating Pressure (K-3oem, K-4oem)
Soft Pressure:
7
±
5 mmHg
Firm Pressure:
32
±
5 mmHg
A/P Time:
5, 10, 15 and 20 minute A/P Time(s) (K-4oem model only)
A/P Low Pressure:
0% or 50% of high AP pressure setting. (K-4oem model only)
Patient Contact
Control unit and the mattress are
lead free
,
mercury free
and
latex free
,
Dartex top sheet is Halogen-free (bromide-free).
Mechanical Specifications: Control Unit (A)
Dimensions, LxWxH:
12” x 5 3/4” x 10.5” (30cm x 14cm x 27cm) (K-3, K-4 models)
13.5” x 11” x 6” (34cm x 28cm x 15cm) (K-3oem, K-4oem models)
Weight:
K-3, K-3oem = 9 lbs. (4 Kg.) & K-4, K-4oem = 10 lbs. (4.5 Kg.)
Power Cord:
14’ long Hospital Grade
Connection:
½” flow magnetic quick connector (K-3, K-4 models)
½” flow single quick disconnect connector (K-3oem model)
½” (2) & ¼” flow quick disconnect connector coupling (K-4oem model)
Packaging:
1 piece per box
