Kanvus Life H85 User Manual Download Page 62

Page: 62 / 78

Installing Tablet Software

1. Open your computer and start the Windows.

Place the CD disc into the CD/DVD ROM driver

and the installation program will be automatically

activated (See figure to the right).

Select “Tablet Software Setup”, and press the

“Enter” key to start the Tablet Software installation.

The message box will come out with the software

selection. Select the software you want to install

and confirm the installation location. Then, press

“OK” to install.

After the installation is completed, press “OK” to

finish software installation.

To use the Tablet software, you need to install the Driver first and

then install the Tablet Software. (For more information about the

installation of driver, please refer to the included Driver Installation

Manual.)

Summary of Contents for Life H85















































































Search results

Summary of Contents for Life H85

Reviews:

Related manuals for Life H85

Brands by name

Popular brands

Kanvus Life H85, User Manual

Search results

Summary of Contents for Life H85

Reviews:

Related manuals for Life H85

Brands by name

Popular brands