19
Ｍ
Ｍ
Ｍ
Ｍ
Ｍ
Ｍ
Ｍ
Ｍ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ｃ
Ｃ
Ｃ
Ｃ
Ｃ
Ｃ
Ｃ
Ｃ
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
■
Sewing (AUTOMATIC OPERATION)
The following combination pattern are already saved to the machine when you start
sewing. The sewing pattern can be made by the combination for 4 kind of flower pattern
⑨
and 3 kind of feed pattern
⑩
.
＊
Operation procedure is as follows before sewing.
1. Turn on the ON-OFF switch of the table.
2. When power ON, the display LED
①
shows the previous process number.
3. Display the desired process number to LED
①
by using the setting key
③
.
e.g. Single picot : 01, Flower pattern No.3 : 04
4. Turn on the lamp of the bottom dead point
⑫
, by hand-turning of the pulley.
5. Press (AUTO) key.
6. Ensure the turning on the lamp of (AUTO) key.
7. Start the sewing.
8. When sewing the another process, turn OFF the lamp of (AUTO) key by pressing
(AUTO) key. Then, the same sequence from the procedure 3 can be performed.
< Note >
The lamp of (AUTO) key
⑤
turns on ONLY when turning on the lamp of the bottom
dead point
⑫
. It is possible to start the sewing when turning on the lamp of (AUTO)
key. Do not operate the machine before turning on the lamp of (AUTO) key, in order to
get a right stitches. (Under the condition of the POWER OFF, the clutch motor can be
operated at a few rotation. Therefore, do not step on the foot pedal).
