KANSAI SPECIAL DFB Series, Instruction

Page: 34 / 37

31
1 5 - 2 A d j u s t i n g t h e b i n d e r u p a n d d o w n
Adjust the binder up and down according to the
fabric to be used. Adjustment is made by loosening
screw A and wing screw I and turning screw D as
required. After this adjustment is made, tighten
screw A and wing screw I.
1 5 - 3 P o s i t i o n o f t h e u p p e r a n d l o w e r f i n g e r s o f t h e b i n d e r
Position upper and lower fingers so that distance A is
halved by each vertical centerline of the needles.
The line formed by the points of the upper and lower
fingers should be parallel with each horizontal
centerline of the needles.
【
16
】
PQ ADJUSTMENT
A. Adjustment of right & left movement of retainer for elastic thread
The right-left movement of retainer move even of its travel for each needles.
< Adjustment >
Loosen 2 screws on the retainer holder and the retainer eye should keep equal
distance of right-left movement from the center of each needles.
< Note >
Adjust the position of J and K according to the finished pin
tuck.