KANSAI SPECIAL DFB Series, Instruction

Page: 33 / 37

30
1 4 - 5 A d j u s t i n g t h e s p r e a d e r s
The clearance between spreader K
，
L and M and needles should be 1~1.2mm.
Spreader up-and-down adjustment is made with screws Q.
Spreader tilt adjustment is made with screws R.
【
15
】
PTV MECHANISM
1 5 - 1 D i s a s s e m b l i n g a n d r e a s s e m b l i n g t h e b i n d e r
■
To disassemble the binder
Remove screw A. Remove the binder by pulling it
toward you while referring to arrows B and C.
■
To reassemble the binder
Fit the ends of upper fabric guides (F) onto lower
fabric guides (G). Move the binder down in the
direction of arrow H. Check that end D of the
screw touches the bracket. Then tighten screw A.
< Note >
When removing the binder, be careful not to damage the
ends of the fabric guides.