12
DEVICE SETTING
2ND LEVEL
3RD LEVEL
STATUS
TRANSMITTER
RECIEVER
FAN MODE
FOLLOW TEMP
ALWAYS ON
USB CONTROL MODE
HOST
DEVICE
USB Virtual Hub
(USB Device Mode only)
ON
OFF
Input
(Receiver Mode only)
INPUT 1
INPUT 2
Local Priority
(Receiver mode only)
ON
OFF
1. Status:
Set the operational mode of the transceiver. After changing the operation
mode, the unit will automatically reboot.
2. Fan Mode:
Set the fan’s activation behavior. Selecting “Follow Temp” will result in the
fan only turning on if the internal temperature becomes too high.
3. USB Control Mode:
Enable or disable the USB 2.0 (Mini B) port for connection to
USB host devices such as a PC or laptop. Selecting Device Mode enables the USB 2.0
(Mini B) port. Selecting Host Mode disables the USB 2.0 (Mini B) port.
Note: The default setting in Transmitter Mode is Device. The default setting in Receiver Mode
is Host. In a Point-to-Point extension configuration, only one transceiver should be set as a USB
Device at a time.
4. USB Virtual Hub:
Enables or disables the simultaneous connection USB mode which
allows the PC/Laptop connected to this unit to be paired with the USB devices on up
to 7 “Host Mode” transceivers.
Note: Only available when the USB Control Mode is set to Device.
5. Input:
Select the source to display on the HDMI output. Input 1 is the local HDMI
input, Input 2 is the 10GbE streaming video input.
Note: Only available when the unit is in Receiver Mode.
