11
1. HDMI EDID:
Select the EDID to send to the HDMI input. This unit provides the
following 6 internal EDIDs:
FHD (2Ch)
1920x1080p@60Hz (170MHz)
8-bit color, LPCM 2.0
LPCM 2.0
FHD (MCh)
1920x1080p@60Hz (170MHz)
8-bit color
LPCM 7.1 &
Bitstream
UHD (2Ch)
3840x2160p@30Hz (300MHz)
12-bit Deep Color
LPCM 2.0
UHD (MCh)
3840x2160p@30Hz (300MHz)
12-bit Deep Color
LPCM 7.1 &
Bitstream
UHD+ (2Ch)
3840x2160p@60Hz (600MHz)
12-bit Deep Color
LPCM 2.0
UHD+ (MCh)
3840x2160p@60Hz (600MHz)
12-bit Deep Color
LPCM 7.1 &
Bitstream
Note: In some rare cases it is possible for custom or external EDIDs to cause compatibility issues
with certain sources. If this happens, it is recommended to switch to one of the 6 internal EDIDs
for maximum compatibility.
1. HDMI HDCP:
Set the HDCP behavior of the HDMI input.
■
Follow In:
The input supports up to the HDCP version required by the connected
source.
■
Follow Out:
The input supports up to the HDCP version supported by the connected
display.
■
Disable:
HDCP support is completely disabled.
■
Follow API:
Uses the HDCP setting defined by the IP Master (EXT-PROCTRL)
Controller or control software
.
Note: Follow API is not valid in a Point-to-Point configuration.
