KANEXPRO
MX-HDBASE6X6-4k
26 |
P a g e
Controlled by PC(s) in LAN
Connect MX-HDBASE6X6-4K, a router and several PCs to setup a LAN (as shown in
the following figure). Set the network segment of MX-HDBASE6X6-4K to the same as
the router’s, then PCs within the LAN can control MX-HDBASE6X6-4K.
Follow these steps to connect the devices:
Step1.
Connect the TCP/IP port of the MX-HDBASE6X6-4K to Ethernet port of PC
with twisted pair.
Step2.
Set the PC’s network segment to the same as the MX-HDBASE6X6-4K’s. Do
please remember the PC’s original network segment.
Router
Internet
PC
TCP IP Port
/
Same network
segment as the
switcher
Summary of Contents for MX-HDBASE6X6-4K
Page 42: ......
