KanexPro MX-HDBASE6X6-4K, Manual

Page: 15 / 42

KANEXPRO MX-HDBASE6X6-4k
10 | P a g e
Press and hold “ EDID ” for 3 seconds to enter EDID invoking mode, in this mode, use
output buttons 1/2 to switch among the 5 embedded EDID data. Then press “ ENTER ”
to confirm invoking.
Format: Press and hold “EDID” for 3 seconds, “INPUTS” +“OUTPUTS 1/2”+“ENTER”.
Operations:
 Invoke embedded EDID data for one input
Operation: Press “EDID” (hold for 3 seconds to enter in EDID setting status), “INPUTS”
+ “OUTPUTS” + “ENTER”.
Example: Set
the EDID data of INPUT 2 to the forth type of embedded EDID data:
Press (hold for 3 seconds) or to switch to the
4th EDID data .
Note: If the conversion is successful, indicators of the pressed buttons will blink green
for three times at normal speed; if the conversion failed, they will blink for three times
quickly.
4.1.3
Inquiry
 Check status
Press and hold the button “ENTER” for 3 seconds, it will enter system inquiry menu.
Use Left and Right direction button to navigate checking the previous/next items.
Function Items Example Description
Check the
connection status of
inputs Y means the corresponding
port is connected with input
device, N means not.
Check the
connection status of
outputs Y means the corresponding
port is connected with output
device, N means not.
Correspondence
between inputs and
outputs Shows the correspondence
between the 4 inputs and 4
outputs.