KanexPro HD-VTSC72-4K User Manual Download Page 63

Page: 63 / 67

EDID Copy

Select the EDID from six factory preset EDID package, seven custom EDID or HDMI output EDID for
each input port, and click the

Submit

to take it into effect.

EDID Upload

For

EDID Upload

, user could upload a prepared EDID file from local pc. Click the

Choose File

to find a

certain EDID file from local PC and select which custom EDID package to upload it. Then click

Submit

to take into effect. Once upload the new EDID file to the same custom EDID package, the old EDID file
will be replaced.

EDID Download

Right-‐click each button and click “save target/link as” to start   download the relative stored EDID file,
from EDID of HDMI   Output   (The connected display device), seven input   EDID package, or seven
custom EDID package.

Summary of Contents for HD-VTSC72-4K



































































Search results

Summary of Contents for HD-VTSC72-4K

Reviews:

Related manuals for HD-VTSC72-4K

Brands by name

Popular brands

KanexPro HD-VTSC72-4K, User Manual

Search results

Summary of Contents for HD-VTSC72-4K

Reviews:

Related manuals for HD-VTSC72-4K

Brands by name

Popular brands