KanexPro HD-VTSC72-4K, User Manual

Page: 28 / 67

28 / 67
“NORMAL” ratio aspect ratio
Set viewer#3 input as
“FULL” ratio
ATM 0A WIN_RAT W 3 2 0A WIN_RAT W 3 2
Set the picture in Window 3 to fill the
entire window
Set viewer#3 input as
“16:9” ratio
ATM 0A WIN_RAT W 3 3 0A WIN_RAT W 3 3
Set the picture in Window 3 as the 16:9
aspect ratio
Set viewer#3 input as
“4:3” ratio
ATM 0A WIN_RAT W 3 4 0A WIN_RAT W 3 4
Set the picture in Window 3 as the 4:3
aspect ratio
Viewer 4:
Set viewer#4 input as
“NORMAL” ratio
ATM 0A WIN_RAT W 4 1 0A WIN_RAT W 4 1
Set the picture in Window 4 as the original
aspect ratio
Set viewer#4 input as
“FULL” ratio
ATM 0A WIN_RAT W 4 2 0A WIN_RAT W 4 2
Set the picture in Window 4 to fill the
entire window
Set viewer#4 input as
“16:9” ratio
ATM 0A WIN_RAT W 4 3 0A WIN_RAT W 4 3
Set the picture in Window 4 as the 16:9
aspect ratio
Set viewer#4 input as
“4:3” ratio
ATM 0A WIN_RAT W 4 4 0A WIN_RAT W 4 4
Set the picture in Window 4 as the 4:3
aspect ratio
Timing Set
Output
Timing:
AUTO ATM 09 OPT_TIM W 1 09 OPT_TIM W 1
Set the HDMI output as AUTO, outputting
the resolutions based on the EDID
information of the display device.
4Kx2K@30Hz UHD ATM 09 OPT_TIM W 2 09 OPT_TIM W 2
Sets the HDMI output resolution as
4Kx2K@30Hz UHD
1920X1080@60Hz
1080P FHD
ATM 09 OPT_TIM W 3 09 OPT_TIM W 3
Sets the HDMI output resolution as
1920X1080@60Hz 1080P FHD
1280X720@60Hz
720P
ATM 09 OPT_TIM W 4 09 OPT_TIM W 4
Sets the HDMI output resolution as
1280X720@60Hz 720P
1920X1200@60Hz
WUXGA
ATM 09 OPT_TIM W 5 09 OPT_TIM W 5
Sets the HDMI output resolution as
1920X1200@60Hz WUXGA
1600X1200@60Hz
UXGA
ATM 09 OPT_TIM W 6 09 OPT_TIM W 6
Sets the HDMI output resolution as
1600X1200@60Hz UXGA
1280X800@60Hz
WXGA
ATM 09 OPT_TIM W 7 09 OPT_TIM W 7
Sets the HDMI output resolution as
1280X800@60Hz WXGA
1024X768@60Hz XGA ATM 09 OPT_TIM W 8 09 OPT_TIM W 8
Sets the HDMI output resolution as
1024X768@60Hz XGA
Advanced Control
Function Item Command Feedback Description
Power
control
：
Set unit to be waked
up
ATM 09 POW_CRL W 0 09 POW_CRL W 0
When it's Power Off, set the device to
power on.
（
please note it’s hex “0”, not
letter “O”
）