Kane KANE975, Manual, Page: 10 / 44

Page 10
If the user attempts to turn on the analyser while the batteries
are discharged the power management system will prevent turn
on.
Under normal circumstances charging is simply a case of plugging
in the supplied 12V charger (CU12VDC2A1), the analyser will
automatically activate battery charging and indicate the progress
on the display.
In the event of the analyser detecting an extreme state of
discharge of the main batteries, the user will be required to
perform the following procedure:
1. Plug in supplied 12V Charger
2. Press and hold the “On” button for 5 seconds
This will allow the charging of extremely flat batteries.
BATTERY DISPOSAL
Always dispose of depleted batteries using approved disposal methods
that protect the environment.