manualshive.com logo in svg

Kane 9206 Quintox, User Manual, Page: 16 / 72

Share
Download
Kane 9206 Quintox User Manual Download Page 16

 

 

16 

 

GETTING STARTED 

 
Check that you have all the items you have ordered. 
 
Before attempting to use the analyser to take readings it is recommended that the 
batteries are fully charged. 
 
When the charger is connected to the analyser and powered up the red LED by the 
charger socket will flash until the batteries are fully charged.  Once the batteries are fully 
charged the LED will no longer be illuminated. 
 
To charge the handset; connect the handset to the main analyser unit using its cable.  
Whilst switched off, but charging, the display will show the Kane logo and a battery 
charging icon in the bottom right hand corner of the handset screen.  Note:  the handset 
battery is charged via the external battery charger and not from the analyser’s internal 
battery.  Once the handset battery is fully charged the icon will disappear from the screen. 
 
The handset can also be charged directly using the mains charger as used for the 
analyser. 
 
 

BEFORE TAKING READINGS 

 
You need to establish the current set up of the analyser and then make the changes that 
you need to suit exactly what you want to do. 
 
So press the MENU key and then select STATUS as described below. 
 
 

Summary of Contents for 9206 Quintox









































































Reviews:

No comments