KANE3500 Manual
Page 4
1. BEFORE USING THE METER FOR THE FIRST TIME:
Remove the cover and fit a new battery in the battery compartment.
Take great care to
ensure that the battery is fitted with the correct battery polarity.
Then replace the
battery cover. Always check that the meter is working correctly after replacing the battery.
Set the meter’s correct time, date and units. These are then stored when the meter is
switched off.
2. BEFORE USING THE METER EVERY TIME:
After switch on, check that date and time are correct and battery power is sufficient and the
displayed units are the ones required.
SAFETY WARNING
Never connect to a pressure source where you are not sure what the maximum pressure
might be. Always ensure that the meter you are using is correctly rated for the pressure that
you intend to measure. Excessive pressure (>5 times nominal range) can permanently
damage the meter’s pressure sensor.
NOTE :
Use the
+
input for all single input measurements of pressure or vacuum. Only
use the
–
input when taking a differential measurement.
3.
THE MENU FUNCTIONS
The MENU structure comprises main menu options. STORE, SETUP and PRESSURE
have a sub-menu structure. SERVICE is for use by an approved service organisation only.
MENU
Press
and use the
button to select the following function for change:
STORE
SETUP
PRESSURE
SERVICE
EXIT
Press
to select a main menu function
When you have selected the function to change, press
to select.
Repeat this to scroll through the menu and select (using the
key) and change (using
the
/
keys) the function.
