14
Warning!
This symbol indicates a possible risk of injury, death, or
serious damage to equipment if safety precautions for
device installation, operation, or maintenance are not
observed.
Caution!
This symbol indicates a possible risk of injury or damage
to equipment if safety precautions for device installation,
operation, or maintenance are not observed.
Note!
System status message or help message.
Warning!
Failure to observe the instructions below may
result in serious injury, death, or serious damage
to equipment.
The control unit must be installed, operated and maintained
by qualified personnel who have received appropriate
training in operation of high voltage equipment. Measuring
devices must be installed in accordance with local and
national electrical codes and regulations.
• The engine and other devices must be equipped with
speed limiters to prevent damage to power control
equipment, which can lead to accidents or damage.
• Speed limiters must be completely independent of the
power source of the power control system. At the same
time, provision should be made for emergency shutdown in
the event of overtemperature and oil pressure drop.
Caution!
First turn off the generator, and then turn off the battery.
The control unit uses electrically induced components to
prevent damage to such components.
It is strictly forbidden to open the back cover of the control
unit and touch electronic components on the boards or wires.
DESCRIPTION OF SYMBOLS
SAFETY PRECAUTIONS
Summary of Contents for KS 14100HDE ATSR
Page 31: ......
