2
6.
Solder as show in picture below: inner white
conductor to ring terminal (medium length
terminal of the 3 center terminals) and the blank
ground conductor to the ground tab.
7.
It is not necessary to apply any strain relief.
8.
Close the screw cap.
9.
Reinstall the endpin jack.
10.
Install the Double Helix pickup following the
included Double Helix pickup installation
manual.
11.
Use the supplied stereo cable to connect the
guitar to the Dual Channel Pro ST preamp.
Pure Mini will be on channel 1
Double Helix on channel 2
Please refer to the included Dual Channel Pro
ST Preamp manual for preamp details.
12.
This photo shows a suggested preset for the EQ
trimmers inside the preamp, especially good for
the GLOSS setting of the Double Helix.
13.
If you preferably use the STEAM setting of the
Double Helix, you might want to turn down the
gain trimmer of channel 2 somewhat (the upper
left trimmer on the pic above), as the STEAM
setting is considerably louder than the GLOSS
setting.
