the safety wire
plate.
b.
Insert the new
safety wire plate
into safety wire box.
c.
Resume the cover
of safety wire box.
7.8
Carburetor
The idle speed adjusting screw
bolt on carburetor is used to
adjust the speed of idle speed.
Tighten the screw and the seed
will slow down; loosen the
screw and the speed will speed
up. You must adjust the speed
to the lowest stable position
when adjusting.
The rest inspections of
carburetor need certain
experiences and please contact
dealers of franchiser for
technicians help.
7.9
Steering system.
Routine screw inspections for
the steering pole, steering
machine and turning pole are
necessary. Toe-in: you adjust
them by pulling pole and the
distance is 3-6mm.
Summary of Contents for 150GKA-2 Series
Page 1: ...Important Safety Warning...
