Free Path of brake
pedal
The distance between the
initial position of the pedal
and working position
means free path of brake
pedal.
It is necessary for you
to replace the braking
disk if it is less than
3mm thick.
Please replace the
braking pedal if it is not
active. Please pay
attention to spring,
screw bolt, linchpin and
the pipe when replacing.
7.5
Accelerator
The free path of
accelerator is 3 – 5 mm,
which can be measured
from the initial position
to the position where
the revolution begins to
rise.
It is necessary to adjust
accelerator cable and
the screw nut in the
end of carburetor if
free path of accelerator
is not in its proper
distance. You should
lock it after adjustment.
Please replace
accelerator cable if it is
damaged.
Inspect the return
spring of accelerator
pole and replace if it
cannot work properly.
7.6
Tire check
The tires of the vehicle are
low pressure ones. The
over-high or over-low air
pressure benefits nothing
to the proper performance.
The measure of air pressure
should be conducted under
the cool state.
Depth of tire checker
Please check surface and
side and make sure that
there is no crack on it, no
foreign substances in it and
no leakage of air. You
should replace the tire if
the depth of tire checker is
less than 2mm.
7.7
Battery
You must connect the
red wire to “+” pole and
the black wire to “-
“ pole when installing
the battery. You should
replace the battery if it
cannot store electricity.
Generally speaking,
battery should be
replaced every 2-3
years.
Safety wire safety fuse
must be installed in the
safety wire box. If
safety wire is frequently
damaged, there is
possibly a short circuit
or over-loading.
The chance of safety
wire:
a.
Open safety wrie
box and take out
Summary of Contents for 150GKA-2 Series
Page 1: ...Important Safety Warning...
