background image

User's Manual

K&F SONA 6

KLING & FREITAG GMBH © 2017

Version 5.8

Page 4 of 22

1.

Introduction

Thank you for purchasing a KLING & FREITAG product. To guarantee a trouble-free operating
of the equipment and to allow your KLING & FREITAG SONA 6 system to achieve its full
potential read the user's manual carefully before use. This item is a quality accessory for the
SONA 6 speaker system. As the owner of a SONA 6 loudspeaker, you now have a versatile and
highly professional tool which, when operated properly, is a true pleasure to use.

1.1

Icons Used

Warning

This icon indicates a risk of injury or death. Not following these instructions may result in
serious health problems including potentially fatal injuries.

Caution

This icon indicates a possibly dangerous situation. Not following these instructions may cause
minor injuries or damage.

This icon marks instructions for proper use of the described products. Not following these
instructions may cause malfunctions or damage.

Tip

This icon marks information provided for simplified use of the described products.

1.2

About this Manual

© KLING & FREITAG GmbH. All rights reserved.

All specifications regarding the features of the described products and applicable safety
guidelines provided in this manual are based on information available at the time of
publishing.

We assume no responsibility for technical specifications, dimensions, weights, and properties.

All information in this manual is subject to change without notice.

All persons who use the speaker system must have this guide and all further information
for safe operations available to them during assembly, disassembly, and use. The speaker
system may neither be set up nor used until these user's manual has been read, understood
and kept readily available in site.

All KLING & FREITAG manuals are originally authored in German.

KLING & FREITAG spare manuals are separately available for order or can be downloaded
from our website: www.kling-freitag.de.

Contact Us:

[email protected]
KLING & FREITAG GMBH, Junkersstr. 14, D-30179 Hannover
Phone +49 511 96 99 70, fax +49 511 67 37 94 (other countries)

Summary of Contents for SONA 6























Reviews: