User's Manual
K&F SONA 6
KLING & FREITAG GMBH © 2017
Version 5.8
Page 9 of 22
4.
Wall and Ceiling Installation
4.1
Required Tools
•
T25 Torx key
•
16 mm spanner (only black version)
•
17 mm spanner (2 x for white version)
•
Mounting accessories for installation on walls or ceilings
4.2
Temporary alignment of the speakers
Tip
Loosen one or two of the three Torx
srews only. This way you can avoid
having to tighten an screw that got
covered by the Mounting Arm while
you aligned the speaker.
Loosen this screw(s) just enough so that
you can move the Mounting Arm with
some resistance. This will simplify the
final alignment of the speaker. This
will simplify the final alignment of the
speaker.
Align the loudspeaker arm as desired, and
then retighten the Trox screws that you
previously loosened.
Tighten the screws enough so that
the speaker reliably keeps its position.
Using excessive force to tighten
the screws can result in irreparable
destruction of the threads!
Summary of Contents for SONA 6
Page 2: ......
