Copyright
©
Kanda 2013
16
Note:
The LCD, if fitted, will cover JTAG port. In this case you will have to use adapters
supplied.
1) Connect Adapter A to end of JTAGAVR lead
2) Plug adapter into Port F header, with adapter headers facing into board
3) Make sure ADC port is turned fully on – 5V
JTAGAVR Documentation
JTAGAVR uses AVR Studio software, so no extra software needs installing. On the CD
supplied with STK300ICE or JTAGAVR, there is documentation on the tool. It is in a
Folder called ICE, in Documentation folder.
These PDF files give more detail about using the JTAGAVR tool.
Firmware Updates
If you change AVR Studio to a different version or install a new Service Pack, then it
may want to do a firmware update using the built-in AVRProg software. Serial port
versions of JTAGAVR will update fine but USB versions will not be found by AVRProg,
because it only looks at COM1 to COM4. See
JTAGAVR Quick Start Guide
in
Documentation > ICE
folder for details on changing COM Port setting.
Conclusion
This guide has briefly described the main features of the STK300 package. There is
more information about AVR Studio on the CD, in its Help file and online at
www.atmel.com
AVRISP has a help file, and there are AVR datasheets and instruction set
documentation on the CD.
The other packages on the CD have help and documentation included.
Port Headers
JTAG
AVR
Serial Lead
USB
Adapter
PC
running
AVR
Studio
USB Port
Serial Port
JTAG
Header
ATmega128
STK300
Board
