Nesis
— User’s Manual
6. Settings
6
Settings
The settings screen allows choosing from several different icons. Figure 25 illustrates the
screen. The settings icons are arranged into two groups. The first group consists of icons
which are accessible to the user, while the second group consists of icons which are accessible
to the service personel only.
Figure 25:
User settings options (left) and service settings options (right).
The following options are available in the user group. Each option is described later in
individual subsections:
The
Route Planning
icon is used to create, delete and edit the routes.
The
Logbook
icon is used to view the flight logs.
The
User Preferences
icon is used to change some parameters, which define Nesis
behaviour.
The
Units
icon is used to change the instrument units.
The
Compass Calibration
icon is used to calibrate compass by turning the airplane
or to adjust the compass heading correction.
The
Date & time
icon is used to set computer time with GPS and to set time zone.
The
Software Updates
icon allows updating the software in Nesis and units connected
to the CAN bus.
The
File transfer service
icon is used to copy map updates, check list and trans-
lations.
The
Alarms
icon is used to set individual alarms.
The
User Waypoints
icon allows adding, editing and deleting user specific waypoints.
The
Service Mode
icon is a gateway to the service specific settings.
Version 2.0
32
©
Kanardia
2011
