Nesis III User’s Manual
8.3
Settings
External long
When connected, it is typically used to re-activate autopilot.
The following actions can be assigned to each of the buttons mentioned before.
Note that some actions require additional equipment to be connected to the
CAN bus to be operational.
•
Not used
means that this shortcut is not in use.
Autopilot menu
is a
shortcut to the Nesis autopilot menu. See section 12.8 on page 119.
•
Autopilot level
is a shortcut to the autopilot level command.
•
Autopilot disable
is a shortcut to the autopilot disable command.
•
Logbook
is a shortcut to logbook actions.
•
Settings
is a shortcut to the user options page.
•
Near airfields
is a shortcut to the list of nearest airfields.
•
Waypoints
is a shortcut to the waypoint selection window.
•
User Wayppoints
is a shortcut to user waypoint selection window.
•
Set marker
is a shortcut to the marker setting command.
•
Home screen
is a shortcut to the default (home) screen.
•
Alarms
is a shortcut to the alarms window.
•
Video resize
enlarges or shrinks the video subwindow.
•
Next page
switches to the next page – same as pager button.
8.3.2
Units
Nesis uses several units for different physical quantities like distance, velocity,
mass, volume, etc. Table 9 shows available units. The quantities are grouped
according to their function.
88
©
Kanardia
2018-2022
