Kanardia Nesis III User Manual Download Page 133

Page: 133 / 136

Nesis III User’s Manual

14.1

The Qt Library

6. Select the

Qt Library

from the list.

7. Select the

Install Qt Library

option.

8. Confirm the decision – select

Yes

9. Nesis will copy the libraries found on the USB stick to the internal flash

drive by overwriting any existing libraries.

10. Close all windows and turn Nesis off.

11. Power Nesis on. Now, it should start with new version of Qt libraries.

If something goes wrong and Nesis does not start anymore, start it in emer-
gency mode. See section 10.4 . Then perform software update with the official
version of Nesis software. This should restore Nesis back to working state.

14.1.5

Copy of Qt License Document

A copy of the Qt license document is stored in Nesis. It can be viewed using
the procedure below:

1. Switch to the

Options

page.

2. Select the

Info

icon.

3. A list of items appears. Choose the

Qt Library

option.

4. Another list appears. Choose the

View Qt license

item.

5. A window with original Qt license document appears. Scroll down to

read the complete text.

133

Kanardia

2018-2022

Summary of Contents for Nesis III









































































































































Search results

Summary of Contents for Nesis III

Reviews:

Related manuals for Nesis III

Brands by name

Popular brands

Kanardia Nesis III, User Manual

Search results

Summary of Contents for Nesis III

Reviews:

Related manuals for Nesis III

Brands by name

Popular brands